Paint Line Conveyor Systems and Material Handling

Production Systems is an integrator of domestic conveyor systems including:
Overhead enclosed track, I-beam, manual, power only, power and free, tow lines, belt and roller conveyors for overhead hang lines, onfloor and infloor tow lines and flat lines.

Production Systems offers custom designs of conveyor and complementary equipment including:
Carts, carriers, loading & unloading equipment, inclined belt conveyors with dust collection for sanding or wiping, strand, spindle, chain on edge conveyors and power rotators.

Types of Conveyors

Production Systems’ design and engineering team will work with your requirements to integrate the right conveyor solution.

INFLOOR TOW LINE

Infloor tow line conveyors are designed for heavier weighted items to be finished. Carts can easily be removed from the in ground track system to adjust to your finishing needs. The infloor design allows for a longer life and dexterity.

ONFLOOR TOW LINE

Onfloor tow line conveyors are best suited for lighter items. Similar to the infloor tow line, the track will be on the ground but not dug into the concrete. Best suited for smaller finishing lines, the onfloor tow line can easily be relocated for future operations.

OVERHEAD I-BEAM

Overhead I-beam conveyor will support heavier products for finishing. Structural support is added to hold the conveyor system in place as products run along the track.

ENCLOSED TRACK & OVERHEAD INVERTED

Overhead enclosed track conveyors are best suited for less weight and offer less contamination for the conveyor to your finished product.

POWER & FREE

Power & free conveyors provide you with complete control by using a dual track system. The power track will move your parts throughout the line while the free track can disengage to move your product to another section of the line.

CHAIN-ON-EDGE

Chain-on-edge conveyors are best suited for finishing small delicate parts. This type of conveyor is ideal for automated finishing systems. Parts sitting on top of the chain-on-edge system prevents contamination from the conveyor itself, preventing damage to the finish.

FLAT LINE: ROLLER BED, SLIDER BED

Flat line conveyor is best suited for automatic finishing of flat products, such as cabinetry and exterior home building products.

Production Systems Provides Finishing System To Gat Creek

Production Systems installed a tow line finishing system at the Gat Creek furniture manufacturing plant. The system included a paint spray booth, a heated flash enclosure, a gas fired cure oven and a make-up air system. Read the full article, A Factory Like No Other, in Manufacturing Today.

Read Article

Testimonials

“Production Systems recently upgraded our wash systems. This was not a typical replacement, but an insertion into the middle of our current system that had deteriorated. Not only was this a challenge but we had an aggressive timeline and could not afford to be down for more than one week. The planning process to achieve this was key. We had multiple reviews to ensure that we could perform to plan and stay within the agreed budget. Each element was analyzed and discussed to guarantee the plan was successful. The implementation was flawless.”

Susan Rothecker, SMT

“Production Systems Inc. fabricates high quality equipment that will last for years! Their equipment is tried and proven and passes the test.”

Matthew Fisher, Palmer Donavin

Working with PSI was such a pleasure. Not only did they come in and install our finish system in a timely manner but gave us daily and weekly updates. All the folks associated with their teams were informative and very knowledgeable. While we had other trades we were struggling with to get things done during our move, PSI was by far the best to deal with and followed up after the fact. I would highly recommend them if you are thinking about a new finish system.

Andrew Hess, Lumbermen's Inc.